1.簾線輸水膠管
用途:
供采礦、工廠、農林、土木建筑工程常溫下輸送水及一般中性液體。
特點:
膠管管體輕便,具有良好的柔軟性和耐老化性能,膠管的爆破壓力不低于
工作壓力的三倍。
1.Cord Water Transprtation Rubber Hose
Applicability:Apply to transport water and some neutral liquid in mining,factories,farming,civil
engineering etc.
Character:The body is hard,light and convenient with excellent flexibility and anti aging.The burstre
pressure is at least three times of the working pressure.
2.吸水管
用途:
供工礦、土建及水利工程等吸引常溫水及一般中性液體。
特點:
膠管管體有優良的曲撓性,管體堅固,在承受真空度-80KPa(600mm汞柱)的條件下使用時膠管仍
有良好的性能。
2.Water Suction Rubber Hose
Applicability:Apply to suck water and some neutral liquid in mining,civil engineering and water
conservancy projrct etc.
Character:The body is good in flexibility and can perform well under -80KPa(600mm mercury) in a
vacuum.
3.排吸水膠管
用途:
供工礦、工廠、城建及水利工程等吸引或排送常溫水及一般中性液體。
特點:
膠管具有承受正壓或負壓的雙重性能,適于較復雜環境條件下使用。
3.Water Discharge and Suction Rubber Hose
Applicability:Apply to discharge and suck water and some neutral liquid in mining,factories urban
construction and water conservancy project etc.
Character:The hose is suitable for more complex conditions with double properties of bearing positive
and negative pressure.
4.高壓吸水膠管
用途:
適合基礎工程大揚程水泵排水用。
特點:
膠管承壓高,變形小,具有很高的抗拉強度,膠層抗撕裂,耐磨耗,耐老化,性能優良。膠管的爆破
壓力不低于工作壓力的三倍。
4.High Pressure Water Suction Hose
Applicability:Apply to discharge water for the long distant water pump in foundation engineering.
Character:The hose can bear high pressure with excellent properties of high tensile strength,anti aging
and wear proof.The burst pressure is at least three times of the working pressure.
1、簾線輸水膠管主要參數
內徑 in.mm I.D |
工作壓力 Mpa(psi) W.P |
基本長度 Basic Length |
最大長度 Max Length |
|||
公稱尺寸 Size |
公差 Tolerance |
Mpa | Kgf/cm2 | m |
公差 mm Tolerance |
m |
13 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 |
16 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 |
19 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 |
22 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 |
25 | ±0.8 | 0.7 | 7 | 20 | ±200 | 200 |
32 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 |
38 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 |
45 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 |
51 | ±1.2 | 0.7 | 7 | 20 | ±200 | 200 |
64 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 |
76 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 |
89 | ±1.5 | 0.7 | 7 | 20 | ±200 | 200 |
102 | ±2.0 | 0.7 | 7 | 20 | ±200 | 200 |
127 | ±2.0 | 0.7 | 7 | 10 | ±120 | 10 |
152 | ±2.0 | 0.7 | 7 | 10 | ±120 | 10 |
2、吸水膠管主要參數
內徑 in.mm I.D |
基本長度 Basic Length |
||
公稱尺寸 Size |
公差 Tolerance |
m |
公差 mm Tolerance |
25 | ±0.8 | 20 | ±120 |
32 | ±1.2 | 20 | ±120 |
38 | ±1.2 | 20 | ±120 |
45 | ±1.2 | 20 | ±120 |
51 | ±1.2 | 20 | ±120 |
64 | ±1.5 | 20 | ±120 |
76 | ±1.5 | 20 | ±120 |
89 | ±1.5 | 20 | ±120 |
102 | ±1.5 | 20 | ±120 |
127 | ±2.0 | 10 | ±120 |
152 | ±2.0 | 10 | ±120 |
203 | ±2.5 | 10 | ±120 |
254 | ±2.5 | 10 | ±120 |
305 | ±3.0 | 10 | ±120 |
357 | ±3.0 | 10 | ±120 |
3、排吸水膠管主要參數
內徑 in.mm I.D |
工作壓力 Mpa(psi) W.P |
基本長度 Basic Length |
|||
公稱尺寸 Size |
公差 Tolerance |
Mpa | Kgf/cm2 | m |
公差 mm Tolerance |
51 | ±1.2 | 0.6 | 6 | 20 | ±120 |
64 | ±1.5 | 0.6 | 6 | 20 | ±120 |
76 | ±1.5 | 0.6 | 6 | 20 | ±120 |
89 | ±1.5 | 0.6 | 6 | 20 | ±120 |
102 | ±2.0 | 0.6 | 6 | 20 | ±120 |
127 | ±2.0 | 0.6 | 6 | 10 | ±120 |
152 | ±2.0 | 0.6 | 6 | 10 | ±120 |
203 | ±2.5 | 0.6 | 6 | 10 | ±120 |
254 | ±2.5 | 0.6 | 6 | 10 | ±120 |
4、高壓吸水膠管主要參數
內徑 in.mm I.D |
工作壓力 Mpa(psi) W.P |
基本長度 Basic Length |
|||
公稱尺寸 Size |
公差 Tolerance |
Mpa | Kgf/cm2 | m |
公差 mm Tolerance |
76 | ±1.5 | 0.9 | 9 | 20 | ±120 |
89 | ±1.5 | 0.9 | 9 | 20 | ±120 |
102 | ±2.0 | 0.9 | 9 | 20 | ±120 |
127 | ±2.0 | 0.9 | 9 | 10 | ±120 |
152 | ±2.0 | 0.9 | 9 | 10 | ±120 |
203 | ±2.5 | 0.9 | 9 | 10 | ±120 |